検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 7 件中 1件目~7件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Analysis on cooling behavior for simulated molten core material impinging to a horizontal plate in a sodium pool

松下 肇希*; 小林 蓮*; 堺 公明*; 加藤 慎也; 松場 賢一; 神山 健司

Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 9 Pages, 2022/09

ナトリウム冷却高速炉の炉心損傷事故では、溶融炉心物質が制御棒案内管などの流路を通って炉心領域下の炉心入口プレナムに流れ込む。溶融炉心物質は、ナトリウム冷却材中で入口プレナムの水平板に衝突しながら冷却・固化されると見込まれる。しかし、水平構造物に衝突した溶融炉心物質の固化・冷却挙動は、これまで十分に研究されていなかった。これはナトリウム冷却高速炉の安全性向上の観点から解明が必要な重要な現象である。そこで、カザフスタン共和国国立原子力センターの実験施設において、模擬溶融炉心物質(アルミナ: Al$$_{2}$$O$$_{3}$$)を水平構造物上のナトリウム冷却材中に放出する一連の実験が実施された。本研究では、高速炉安全性評価コードSIMMER-IIIを用いたナトリウム試験に関する解析を実施した。解析結果と実験データの比較により、解析手法の妥当性を確認した。また、ジェット衝突時の冷却・固化挙動を評価した。その結果、溶融炉心物質が水平板への衝突により破砕され、周辺部へ飛散することがわかった。さらに、模擬溶融炉心物質がナトリウムによって冷却され、その後、固化することを確認した。

論文

Validation of analysis models on relocation behavior of molten core materials in sodium-cooled fast reactors based on the melt discharge experiment

五十嵐 魁*; 大貫 涼二*; 堺 公明*; 加藤 慎也; 松場 賢一; 神山 健司

Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 6 Pages, 2020/08

In order to improve the safety of nuclear power plants, it is necessary to make sure measures against their severe accidents. Especially, in the case of a sodium-cooled fast reactor (SFR), there is a possibility of significant energy release due to formation of a large-scale molten fuel pool accompanied by re-criticality in the event of a core disruptive accident (CDA). It is important to ensure in-vessel retention that keeps and confines damaged core material in the reactor vessel even if the CDA occurs. CDA scenario initiated by Unprotected Loss Of Flow (ULOF), which is a typical cause of core damage, is generally categorized into four phases according to the progression of core-disruptive status, which are the initiating, early-discharge, material-relocation and heat-removal phases for the latest design in Japan. During the material-relocation phase, the molten core material flows down mainly through the control rod guide tube and is discharged into the inlet coolant plenum below the bottom of the core. The discharged molten core material collides with the bottom plate of the inlet plenum. Clarification of the accumulation behavior of molten core material with such a collision on the bottom plate is important to reduce uncertainties in the safety assessment of CDA. In present study, in order to make clear behavior of core melt materials during the CDAs of SFRs, analysis was conducted using the SIMMER-III code for a melt discharge simulation experiment in which low-melting-point alloy was discharged into a shallow water pool. This report shows the validation results for the melt behavior by comparing with the experimental data.

論文

Monte Carlo criticality analysis under material distribution uncertainty

植木 太郎

Journal of Nuclear Science and Technology, 54(3), p.267 - 279, 2017/03

 被引用回数:8 パーセンタイル:60.93(Nuclear Science & Technology)

過酷事故の炉心溶融の際に生成される二酸化ウラン・コンクリート混合物の臨界性評価に関連して、ワイエルシュトラス関数に基づく確率論的乱雑化モデルを構築し、モンテカルロ法臨界計算の不確かさを検討した。中性子実効増倍率の評価値には、無視できない揺らぎが生じることがわかった。

論文

An Empirical correlation to predict the distance for fragmentation of simulated Molten-Core materials discharged into a sodium pool

松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春

Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 8 Pages, 2016/10

ナトリウム冷却高速炉の炉心損傷時に原子炉容器下部プレナムへ流出した溶融炉心物質がデブリ化するまでの距離の評価を目的として、溶融炉心模擬物質を冷却材中へ放出させる試験を行い、デブリ化距離と流出条件の関係を実験相関式として整理した。実験相関式による予測は実験結果とよく一致した。本研究により、冷却材の沸騰・膨張によるデブリ化促進効果を考慮することで、ナトリウム中におけるデブリ化距離を適切に評価可能であることがわかった。

論文

Distance for fragmentation of a simulated molten-core material discharged into a sodium pool

松場 賢一; 磯崎 三喜男; 神山 健司; 飛田 吉春

Journal of Nuclear Science and Technology, 53(5), p.707 - 712, 2016/05

 被引用回数:17 パーセンタイル:84.03(Nuclear Science & Technology)

ナトリウム中へ流出した溶融炉心物質のデブリ化距離に関する評価手法を開発するため、X線透過装置を用いたナトリウム中デブリ化挙動の可視化実験を行った。本実験では、溶融炉心物質の模擬物質として約0.9kgの溶融アルミニウム(初期温度:約1473K)を内径20mmのノズルを通じてナトリウム中(初期温度: 673K)へ流出させた。実験の結果、ナトリウム中へ流出した溶融アルミニウムのデブリ化距離は100mm程度と評価された。本実験を通じ、デブリ化距離に関する評価手法の開発に有益な知見が得られた。今後、より比重の大きい模擬物質を用いた実験を行い、デブリ化距離と流出条件の関係を表す実験相関式を開発する。

論文

Experimental discussion on fragmentation mechanism of molten oxide discharged into a sodium pool

松場 賢一; 神山 健司; 豊岡 淳一; 飛田 吉春; Zuev, V. A.*; Kolodeshnikov, A. A.*; Vasilyev, Y. S.*

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 6 Pages, 2015/05

ナトリウム中へ流出した溶融炉心物質の微粒化距離に関する評価開発の一環として、溶融酸化物(アルミナ)をナトリウム中へ落下させる微粒化試験を実施し、デブリの粒子径分布を分析した。アルミナデブリの平均粒子径は0.4mm程度であり、従来の流体力学的不安性理論を用いて予測される粒子径と同程度であった。しかし、従来の理論では溶融物質のウェーバー数が増加するとデブリ粒子径が減少すると予測されたのに対し、本微粒化試験ではそのような減少傾向は見られず、ウェーバー数によらずほぼ同じ大きさの粒子径となった。この分析結果から、溶融物質表面における流体力学的不安波が溶融アルミナの微粒化に至る程度まで成長する前に、熱的な現象、すなわち冷却材の局所的な沸騰・膨張が原因となって溶融アルミナを微粒化させたと解釈される。

論文

Distance for fragmentation of a simulated molten-core material discharged into a sodium pool

松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春

Proceedings of 10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) (USB Flash Drive), 7 Pages, 2014/12

ナトリウム中へ流出した溶融炉心物質のデブリ化距離に関する評価手法を開発するため、X線透過装置を用いたナトリウム中デブリ化挙動の可視化実験を行った。本実験では、溶融炉心物質の模擬物質として約0.9kgの溶融アルミニウム(初期温度: 約1473K)を内径20mmのノズルを通じてナトリウム中(初期温度: 673K)へ流出させた。実験の結果、ナトリウム中へ流出した溶融アルミニウムのデブリ化距離は100mm程度と評価された。本実験を通じ、デブリ化距離に関する評価手法の開発に有益な知見が得られた。今後、より比重の大きい模擬物質を用いた実験を行い、デブリ化距離と流出条件の関係を表す実験相関式を開発する。

7 件中 1件目~7件目を表示
  • 1